After looking around for some eagle files for the CC110L, I failed to find anything that was as simple as”copy and paste”. I found the design notes for it and decided to create my own breakout board for testing. For those who don’t know, the TI CC11X are a series of low power RF modules. They are used in the Anaren boost pack and are great for low power RF projects. There are a bunch of development boards to work with but there are no open source eagle files(that I could find) for easily placing this module into your project. I just finished and ordered a set from OSHpark. If you’re brave(I haven’t tested them yet) you can order a set for $5.00 for three,by clicking the link above or using the eagle files below. Its up to you to check the files yourself. Or you can check back in a month when I have had time to test the board layout. Be warned the design calls for 0402 components, which I have used in the eagle files. Click more to get to the Eagle files!
Design can easily be modified to support 315/433mhz but requires reading the datasheet.
Download Eagle Files Here. Made with eagle 7.1.0
Content is under CC BY-SA 3.0 Licence